manualshive.com logo in svg

Siemens SCALANCE XR-300M, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 28

4.5.2

Removal and insertion of the C-PLUG (rack devices)

NOTICE
A C-PLUG may only be removed or inserted when the device is turned off.

Position of the C-PLUG with rack devices

With rack devices, the slot is below a cover on the right-hand side of the 

housing. After undoing the screw (screw head Torx T10), the cover 

plate can be removed and the slot is accessible.

Removing the C-PLUG

A

1. Turn off the power to the device.
2. Remove the cover plate on the right-hand side of the device.
3. Insert a screwdriver between the front edge of the C-PLUG 

(position A) and the slot and release the C-PLUG.

4. Remove the C-PLUG and screw the cover plate firmly in place 

again.

Inserting the C-PLUG

B

1. Turn off the power to the device.
2. Remove the cover plate on the right-hand side of the device.
3. The housing of the C-PLUG has a protruding ridge on the long side 

(position B). The slot has a groove at this position. Insert the C-
PLUG correctly oriented into the slot.

4. Secure the cover plate again with the screws.

Device description
4.5 C-PLUG

SCALANCE XR-300M

28

Compact Operating Instructions, 11/2019, A5E02661171-15

Summary of Contents for SCALANCE XR-300M



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands