Siemens SCALANCE XR-300M Compact Operating Instructions Download Page 22

Page: 22 / 82

Figure 4-2

SCALANCE XR324-12M with MM900

Slot number

Media

modules used

MM992-2CUC

MM991-2 (SC) MM991-2 (SC) MM991-2 (SC)

Port number

Slot number

S10

S11

S12

Media

modules used

MM992-2CUC

MM991-2

Port number

4.3

LED display

The "RM" LED for the "redundancy manager" function

The "RM" LED indicates whether or not the device is operating in the role of redundancy

manager and whether or not the ring is operating error-free.

LED color

LED status

Meaning

off

The device is not operating in the role of "redundancy manager".

green

The device is operating in the role of redundancy manager. The ring

is working without problems, monitoring is activated.

green

flashes

The device is operating in the role of redundancy manager. An in‐

terruption has been detected on the ring and the device has switched

through.

The "SB" LED for the standby function

This LED shows the status of the standby function.

LED color

LED status

Meaning

off

The standby function is disabled.

green

The standby function is enabled. The standby section is passive.

green

flashes

The standby function is enabled. The standby section is active.

Device description
4.3 LED display

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

Summary of Contents for SCALANCE XR-300M



















































































Search results

Summary of Contents for SCALANCE XR-300M

Reviews:

Brands by name

Popular brands

Siemens SCALANCE XR-300M, Compact Operating Instructions

Search results

Summary of Contents for SCALANCE XR-300M

Reviews:

Brands by name

Popular brands