Note
When used on railway stock, a stabilized power supply must be used to comply with EN50155.
FDA and IEC marking
The following devices meet the FDA and IEC requirements listed below:
Device
CLASS 1 LASER Product
6GK5 324-4QG00-1AR2
(*)
6GK5 324-4QG10-1AR2
(*)
6GK5 324-4QG00-3AR2
(*)
6GK5 324-4QG10-3AR2
(*)
6GK5 324-4QG00-1HR2
(*)
6GK5 324-4QG10-1HR2
(*)
6GK5 324-4QG00-3HR2
(*)
6GK5 324-4QG10-3HR2
(*)
6GK5 324-4QG00-1CR2
(*)
6GK5 324-4QG10-1CR2
(*)
* For modular devices, you can find the marking in the operating instructions for the media module or
plug-in transceiver used.
Complies with 21 CFR
1040.10 and 1040.11
CLASS 1 LASER PRODUCT
FDA
IEC
Figure 10-1
FDA and IEC markings
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
10.2
Mechanical stability in operation
The switch meets the following requirements for mechanical stability:
Approvals
10.2 Mechanical stability in operation
SCALANCE XR-300M PoE
86
Compact Operating Instructions, 03/2022, A5E02661178-15