Security and authentication
11.5 Port Access Control List Locked Ports
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
856
Configuration Manual, 06/2016, C79000-G8976-C252-11
11.5.2
Commands in the Global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
configure terminal
command to change to this mode.
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
end
or
exit
command and are then in the
Privileged EXEC mode again.
11.5.2.1
clear-all-static-unicast
Description
With this command, you delete all static unicast MAC address entries from the MAC address
table.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
clear-all-static-unicast
Result
The static unicast MAC address entries are deleted from the MAC address table.
11.5.2.2
auto-learn
Description
With this command, you change to the AUTOLEARN mode.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Summary of Contents for SCALANCE XM-400
Page 882: ......
