
Network structures
6.1 VLAN
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
206
Configuration Manual, 06/2016, C79000-G8976-C252-11
Further notes
You configure the setting with the
switchport access vlan
command.
You can display the status of this function and other information with the
show vlan port
config
command.
6.1.3.9
switchport map protocols-group
Description
With this command, you assign the protocol group and a VLAN to an interface.
Requirement
●
The protocol group is configured.
●
You are in the Interface configuration mode
.The command prompt is:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
switchport map protocols-group
<group id(0-2147483647)>vlan<vlan-id(1-4094)>
The parameters have the following meaning:
Parameter
Description
Range of values / note
group id
Number of the group
0 ... 2147483647
vlan
Keyword for a VLAN connection
-
vlan-id
Number of the addressed VLAN
1 ... 4094
Result
The group is assigned to the port and the VLAN.
Further notes
You delete the setting with the
no switchport map protocols-group
command.
You can display the status of this function and other information with the
show vlan
protocols-group
command.
Summary of Contents for SCALANCE XM-400
Page 882: ......