Configuration
3.2 Load and Save
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
117
Further notes
You enable the password for the user certificate with the
password
command.
3.2.5.4
tftp filename
Description
With this command, you assign a name to a file type.
The file type decides the type that is affected by the
tftp load
or
tftp save
action. The
name decides the file to be copied to or from the TFTP server.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp filename {showfiles|filetype< filetype >name<filename>}
The parameters have the following meaning:
Parameter
Description
Range of values / note
showfiles
Shows the available files
-
filetype
Keyword for a file type to be assigned
a name
-
filetype
Name of the file type
max. 100 characters
name
Keyword for a file name to be assigned
to the file type
-
filename
Name of the file
max. 100 characters
Result
The file types are displayed or the file type is assigned a name.
Further notes
With the "
show loadsave files
" command, you can display the file types.
Summary of Contents for SCALANCE XM-400
Page 882: ......
