Siemens SCALANCE XM-400, Configuration Manual

Page: 115 / 960

Configuration
3.2 Load and Save
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
115
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
delete{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter Description Range of values / note
showfiles
Shows the available files -
filetype
Keyword for the file type to be deleted -
filetype
Name of the file type max. 100 characters
Result
The files are displayed or the file is deleted.
Further notes
With the "
show loadsave files
" command, you can display the file types.
3.2.5.2 password
Description
With this command, you activate and configure the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
password {showfiles|filetype<filetype>[pw<password>]}