Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
99
Configuration of the SNMPv3 groups
When you click on a group name, you open the page for configuring the group properties:
Figure 4-30 SNMPv3 Group Configuration
Group Name
The group name is displayed here. This text box is read-only, you can only assign the group
name when creating a group and you cannot modify it later.
Security Level
This text box displays the authentication and the encryption. You have the following three
options for the security levels:
Security level
Special features
Comment
no Auth / no Priv
No authentication, no encryption.
-
Auth
Authentication with the MD5 or SHA algorithm, no encryption.
-
Auth / Priv
Authentication with the MD5 or SHA algorithm, encryption with
the DES3 algorithm.
-
Read and Write
Here, you enable or disable write access, read access and notification.
Current Entries
By clicking this button, you return to the list of SNMPv3 groups.
New Entry
After clicking this button, the page for creating a new group opens.
Delete
Click on this button to delete a group. If members are already entered in the group, you
cannot delete the group nor is it possible to change the security level for the group.
