manualshive.com logo in svg

Siemens SCALANCE X-200RNA, Operating Instructions Manual

Share
Download
Siemens SCALANCE X-200RNA Operating Instructions Manual Download Page 71

Functional description and configuration using Web 
Based Management

7

7.1

Introduction

To make the best possible use of the technical possibilities of the devices SCALANCE 

X-200RNA of the product line, you can adapt the configuration of the device to the concrete 

situation in which it is used. 
Web Based Management (WBM) accesses the configuration of the SCALANCE X-200RNA 

using a Web browser. An Ethernet connection to the device is necessary.

Note
To prevent unauthorized access to the SCALANCE X200RNA, there is an automatic logout 

after 15 minutes or after the time configured in the "Agent Timeout Configuration" menu. A 

manual logout is also possible with the appropriate button in the user interface. Exiting the 

browser does not close the session. If the browser is started again within the timeout, the 

session continues to be used.

Note
To use SNMP Management and traps, you require a network management station. This does 

not ship with IE switches.

SCALANCE X-200RNA

Operating Instructions, 10/2016, C79000-G8976-C342-04

71

Summary of Contents for SCALANCE X-200RNA































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands