Siemens SCALANCE W1750D UI Configuration Manual Download Page 151

Page: 151 / 570

Wired Profiles

12.1 Configuring a Wired Profile

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

151

12.1.3

Configuring Security Settings for a Wired Profile

Note
If you are creating a new wired profile, complete the Wired Settings and VLAN procedures

before specifying the security settings. For more information, see Configuring Wired Settings

(Page 147) and Configuring VLAN Settings for a WLAN SSID Profile (Page 149).

Configuring Security Settings for a Wired Employee Network

You can configure security parameters for the Employee network by using the SCALANCE

W UI or the CLI.
In the SCALANCE W UI
To configure security parameters for the Employee network:
1.

Configure the following parameters in the Security tab.
–

Port type—To support trusted ports in an AP, select Trusted. When the Port type is

trusted, MAC and 802.1X authentication parameters cannot be configured. The Port

Type is Untrusted by default.
In a trusted mode, APs will not create any user entry. A predefined ACL is applied to

the trusted port in order to control the client traffic that needs to be source NATed.

–

MAC authentication—To enable MAC authentication, select Enabled. The MAC

authentication is disabled by default.

–

802.1X authentication—To enable 802.1X authentication, select Enabled. The 802.1X

authentication is disabled by default.

–

MAC authentication fail-thru —To enable authentication fail-thru, select . When this

feature is enabled, 802.1X authentication is attempted when MAC authentication fails.

The MAC authentication fail-thru check box is displayed only when both MAC

authentication and 802.1X authentication are Enabled.

Select any of the following options for Authentication server 1:
–

New—On selecting this option, an external RADIUS server must be configured to

authenticate the users. For information on configuring an external server, see

Configuring an External Server for Authentication on page 154.Authentication and

User Management on page 140

–

Internal server— If an internal server is selected, add the clients that are required to

authenticate with the internal RADIUS server. Click the Users link to add users. For

information on adding a user, see Managing AP Users on page 140.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Siemens SCALANCE W1750D UI, Configuration Manual, Page: 151 / 570

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews: