Siemens SCALANCE W1750D CLI Function Manual Download Page 517

Page: 517 / 762

CLI Commands

4.16 S

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

517

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

4.16.147

show ip interface

Description

This command displays a summary of IP related information for all interfaces configured on

an AP.

Syntax

show ip interface

brief

detail

Usage Guidelines

Use this command to view a brief summary of IP related information for the AP interfaces.

Example

The following output is displayed for the show ip interface brief command:

Interface IP Address / IP Netmask Admin Protocol

br0 10.17.88.188 / 255.255.255.192 up up

The output of the show ip interface brief command provides the following information

Column

Description

Interface

Lists the interface and interface identification, where applicable.

IP Address /IP Netmask

Lists the IP address and subnet mask for the interface.

Admin

Displays the administrative status of the interface.

•

Enabled—up

•

Disabled—down

Protocol

Displays the status of the IP on the interface.

•

Enabled—up

•

Disabled—down

The following output is displayed for the show ip interface detail command:

ifname : br0

--------------------

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 517 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: