Siemens SCALANCE W1750D CLI Function Manual Download Page 49

Page: 49 / 762

CLI Commands

4.1 A

SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04

4.1.25

ap-installation

Description

This command tests a configured authentication server.

Syntax

ap-installation default|indoor|outdoor

Parameter

Description

Range

Default

ap-installation

Specify the type of installation (indoor

or outdoor). The default parameter

automatically selects an installation

mode based upon the AP model type.

default
indoor
outdoor

default

Usage Guidelines

Use this command to provision an outdoor AP into an indoor AP or vice versa. The AP

needs to be rebooted for the configuration to take effect.

Example

The following example changes the installation type of the AP from default to outdoor:

(scalance)# ap-installation outdoor

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

4.1.26

apply

Description

This command is used to save or apply the configuration settings on the AP.

Syntax

apply {cplogo-install| cplogo-uninstall| debug-command| delta-config}

Parameter

Description

cplogo-install

Installs the captive portal logo on the AP.

cplogo-uninstall

Uninstalls the captive portal logo on the AP.

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 49 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: