Siemens SCALANCE W1750D CLI Function Manual Download Page 472

Page: 472 / 762

CLI Commands

4.16 S

SCALANCE W1750D CLI

472

Function Manual, 03/2019, C79000-G8976-C452-04

7 seconds ago Success

Note
DHCP profile name is None for the Master AP update sent.

The output of this command provides the following information:

Command/Parameter

Description

Host Name

Displays the hostname of the DDNS client

Domain Name

Displays the domain name mapped to the DDNS

client.

IP Address

Denotes the IP address of the DDNS client.

DHCP profile name

Denotes the profile name of the DHCP server.

Success Count

Indicates the number of times the update sent to

the DNS server succeeded.

Failure Count

Indicates the number of times the update sent to

the DNS server got failed.

Command Information

AP Platform

Command Mode

All platforms

Privileged EXEC mode

4.16.117

show delta-config

Description

This command displays the difference between the current configuration in the current CLI

session and the configuration that is saved on the AP

Syntax

show delta-config [<cfgid>]

Usage Guidelines

Use this command to view the difference between the current configuration information

stored in the AP flash memory and the configuration information saved in the AP memory.

Summary of Contents for SCALANCE W1750D CLI



























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews:

Siemens SCALANCE W1750D CLI, Function Manual, Page: 472 / 762

Search results

Summary of Contents for SCALANCE W1750D CLI

Reviews: