Siemens SCALANCE M812 Page 57 Operating Instructions Manual Download | Manualshive

Page: 57 / 74

background image

Maintenance and cleaning

6

WARNING

Unauthorized repair of devices in explosion-proof design

Risk of explosion in hazardous areas
• Repair work may only be performed by personnel authorized by Siemens.

WARNING

Impermissible accessories and spare parts

Risk of explosion in hazardous areas
• Only use original accessories and original spare parts.
• Observe all relevant installation and safety instructions described in the manuals for the

device or supplied with the accessories or spare parts.

CAUTION

Hot surfaces

Risk of burns during maintenance work on parts with a surface temperature above 70 °C
(158 °F).
• Take appropriate protective measures, for example, wear protective gloves.
• Once maintenance work is complete, restore the touch protection measures.

NOTICE
Cleaning the housing

If the device is not in a hazardous area, only clean the outer parts of the housing with a dry cloth.

If the device is in a hazardous area, use a slightly damp cloth for cleaning.

Do not use solvents.

SCALANCE M826
Operating Instructions, 10/2022, C79000-G8976-C362-07

57

«
...
55
56
57
58
59
...
»

Summary of Contents for SCALANCE M812











































































Reviews:

No comments

Related manuals for SCALANCE M812

Brand: B&K Pages: 5

Brand: B&K Pages: 28

Brand: Keithley Pages: 36

Brand: Rain-Flo Irrigation Pages: 16

Brand: Raymarine Pages: 70

Precision2 HP2 Series

Brand: B-K lighting Pages: 6

Brand: Zero Hand Truck Pages: 38

Brand: B-K lighting Pages: 3

Brand: GALBIATI Pages: 20

Brand: Datavideo Pages: 48

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 3

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 8

Brand: Datavideo Pages: 10

Brand: Hacker Pages: 2

Brand: J.P. SELECTA Pages: 8

Brand: Haemonetics Pages: 134

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands