Siemens SCALANCE M812 Page 3 Operating Instructions Manual Download

Page: 3 / 74

Preface

Scope of validity of the operating instructions

These operating instructions apply to the following device:

• SCALANCE M826-2

Purpose of the operating instructions

These operating instructions contain information with which you will be able to install and
connect the SCALANCE M826 correctly. The configuration and the integration of the device in
a network are not described in these instructions.

Naming of the devices

Classification

Description

Terms used

Product line

For all devices and variants in the prod‐
uct line, the term M-800 is used.

M-800

Device family

For all devices and variants in the device
family line, the term M82x is used.

M82x

Device

If information relates to a specific device,
the device name is used.

M826

Article numbers

Product

Description

Article number

SCALANCE M826-2

SHDSL router

6GK5826-2AB00-2AB2

You will find the article numbers for the Siemens products of relevance here in the following
catalogs:

• SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI

• SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70

• Industry Mall - catalog and ordering system for automation and drive technology, Online

catalog (

https://mall.industry.siemens.com

)

You can request the catalogs and additional information from your Siemens representative.

Documentation on the Internet

You can find the current version of the document on the Internet at. (

https://

support.industry.siemens.com/cs/ww/en/ps/15985/man

)

Enter the name or article number of the product in the search filter.

SCALANCE M826
Operating Instructions, 10/2022, C79000-G8976-C362-07

Summary of Contents for SCALANCE M812











































































Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands

Siemens SCALANCE M812, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands