RUGGEDCOM WIN7251
Installation Guide
Chapter 4
Technical Specifications
Mechanical Specifications
31
Section 4.5
Mechanical Specifications
Weight (Base Station)
3.2 kg (7.1 lbs)
Weight (Mounting Bracket)
0.6 kg (1.2 lbs)
Ingress Protection
IP67
Chassis Material
Aluminum
Section 4.6
IDU-to-ODU Cable Specifications
The following outlines the technical specifications for the Indoor Unit (IDU) to Outdoor Unit (ODU) cable required
to assemble the Power-over-Ethernet (PoE) connector. For more information about assembling the PoE connector,
Section 2.8.3, “Assembling the PoE Connector”
.
The IDU-to-ODU cable is a special 4×2×24 AWG File Transfer Protocol (FTP) CAT-5e Outdoor Double Jacket Data
Cable that meets the requirements of the UL 1581 standard for vertical flame test (VW-1).
Description
Applications
Outdoor installations, fixed or portable installations, digital distribution frames in transmission stations,
outdoor installations in harsh environments.
General Construction
Custom made cable designed specially for wireless systems, meeting the requirements of CAT-5e per
ANSI/TIA/EIA-568-B.2 and IEC 61156-5. The cable contains 4 twisted pairs, cabled, foil-tape shielded and
jacketed with two special black UV resistant, flame retardant PVC compounds for direct outdoor use in
harsh electrical environments. The diameter of the inner core complies with RJ45 connecting hardware
allowing direct connection to equipment without patch cords.
Design and Materials
Weight
68.0 kg/km
Maximum Length
80 m (262.5 ft)
Conductor Material
Bare copper
Conductor Area
0.52 mm (0.02 in)
Wire Gage
24 AWG
Insulation Material
Solid PO
Insulation Outer Diameter
1.07 mm (0.04 in)
Color Code
Per TIA/EIA 568-B
Overall Foil Shield
Yes
Overall Shield Material
Aluminum/Polyester Foil
Overall Foil Design
100% Coverage
Overall Drain-Wire Material
Tinned Copper
