RUGGEDCOM WIN7023
Installation Guide
Chapter 5
Certification
TÜV Rheinland
35
•
EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
•
EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
•
UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
•
UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
.
Section 5.1.5
ISED
This base station is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation
Science and Economic Development Canada) standard:
•
RSS-195
Wireless Communication Service (WCS) Equipment Operating in the Bands 2305-2320 MHz and 2345-2360 MHz
Section 5.1.6
FCC
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
This device further complies with Title 47 of the Code of Federal Regulations (CFR) Part 15 Subpart B and Part 27.
