RUGGEDCOM WIN7014
Installation Guide
Chapter 5
Certification
TÜV Rheinland
37
•
EN 60950-22
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
•
EN 61850-3
Communication Networks and Systems for Power Utility Automation – Part 3: General Requirements
Section 5.1.4
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
•
UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
•
UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.
A copy of the TÜV Rheinland Declaration of Conformity is available from Siemens Canada Ltd. For contact
information, refer to
.
Section 5.1.5
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
•
IEC 61850-3
General Requirements
•
IEC 870-2-2
Telecontrol Equipment and Systems – Part 2: Operating Conditions – Section 2: Environmental Conditions
(Climatic, Mechanical and Other Non-Electrical Influences)
•
MIL-STD-810F
Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory
Tests – Method 509.4 (Salt Fog)
