manualshive.com logo in svg

Siemens RUGGEDCOM WIN5151, User Manual, Page: 75 / 108

Share
Download
Siemens RUGGEDCOM WIN5151 User Manual Download Page 75

RUGGEDCOM WIN

User Guide

Chapter 5

Setup and Configuration

Configuring Neighbor Scanning

65

Figure 57: GPS Screen

2. In the 

GPS Enabled

 list, select either True (enabled) or False (disabled).

3. Click 

Apply

.

4. Reboot the device. For more information, refer to 

 Section 4.5, “Rebooting the Device” 

.

Section 5.5

Configuring Neighbor Scanning

Configuring neighbor scanning provides the option to disable the scanning of nearby base stations for handover

purposes. Setting the 

Allow NBR Scanning

 parameter to 

No

 disables neighbor scanning in a mobile setup for a

specific device. Even if the base station broadcasts a list of neighbors and scanning triggers – the RUGGEDCOM

WIN will not attempt to scan it. The device will never participate in a handover and will always stay connected to

the serving base station. This is useful for a fixed device in a mobile setup.
To configure neighbor scanning, do the following:
1. Navigate to 

WiMAX » Mobility » Settings

. The 

Settings

 screen appears.

Summary of Contents for RUGGEDCOM WIN5151













































































































Reviews:

No comments