Siemens RUGGEDCOM RX1510, User Manual

Page: 527 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting a Prefix List Distribution Path 495
6. If necessary, configure an event tracker to track network commands. For more information, refer to
Section 5.20.4.2, “Tracking Commands” .
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.20.8.3
Deleting a Prefix List Distribution Path
To delete a prefix list distribution path for dynamic RIP routes, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to routing » dynamic » rip » distribute-prefix-list . The Distribute Prefix List table appears.
2 3 1
Figure 565: Distribute Prefix List Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen path.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.20.9
Managing Key Chains and Keys
Key chains are collections of keys (or shared secrets), which are used to authenticate communications over a
dynamic RIP network. Only routers with the same key are able to send and receive advertisements.
Multiple key chains can be configured for different groups of interfaces and the lifetime for each key within a chain
can be separately configured.
The following sections describe how to configure and manage key chains and keys:
•
Section 5.20.9.1, “Viewing a List of Key Chains”
• Section 5.20.9.2, “Viewing a List of Keys”
• Section 5.20.9.3, “Adding a Key Chain”
• Section 5.20.9.4, “Adding a Key”