Siemens RUGGEDCOM RSL910, Installation Manual

Page: 41 / 48

RUGGEDCOM RSL910
Installation Guide
Chapter 5
Technical Specifications
Operating Environment 31
Cable Type
f
> CAT 5
Wiring Standard
g
TIA/EIA T568A/B
Maximum Distance
h
100 m (328 ft)
Isolation
i
1.5 kV
e
Auto-negotiating.
f
Shielded or unshielded.
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.
Section 5.4
Operating Environment
The RUGGEDCOM RSL910 is rated to operate under the following environmental conditions.
Ambient Operating Temperature
jk
-40 to 85 °C (-40 to 185 °F)
Ambient Storage Temperature -40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity
l
5% to 95%
Maximum Altitude 2000 m
j
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
k
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM SFP Transceivers Catalog for SFP temperature ratings.
l
Non-condensing.
Section 5.5
Mechanical Specifications
Weight 1.2 kg (2.7 lbs)
Ingress Protection IP30
Enclosure 20 AWG Galvanized Steel
Section 5.6
Dimension Drawings
NOTE
All dimensions are in millimeters, unless otherwise stated.