Certification
6.1.9 ISO
A copy of the KC Declaration of Conformity is available from Siemens Canada Ltd..
For contact information, refer to
"Contacting Siemens (Page vii)"
.
Notices specific to the RRA:
WARNING
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
6.1.9
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
ISO 9001:2015
Quality management systems – Requirements
6.1.10
ANATEL
This device meets the requirements of the following standards established by the
Agência Nacional de Telecomunicações (ANATEL) and is certified for use in Brazil:
• Anexo à Resolução Anatel nº 442/2006
Notices specific to ANATEL:
Note
The RUGGEDCOM RSG910C is not certified for use on 2G, 3G or 4G LTE networks in
Brazil.
Note
This equipment operates on a secondary basis. That is, it is not entitled to protection
against harmful interference, even from the same type of station, and may not cause
interference to systems operating on a primary basis.
Note
This equipment has no right to be protected from harmful interference and may not
cause interference in duly authorized systems.
RUGGEDCOM RSG910C
Installation Manual, 04/2022, C79000-G8976-1405-11
35
