Certification
6.1.3 European Union (EU)
The device also meets the requirements of the following European directive and
standards:
•
2014/34/EU
Directive 2014/34/EU of the European Parliament and of the Council of 26 Feb-
ruary 2014 on the harmonisation of the laws of the Member States relating to
equipment and protective systems intended for use in potentially explosive at-
mospheres (recast) Text with EEA relevance
•
EN 60079-0:2012/A11:2013
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
6.1.3
European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
•
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
•
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
•
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic Prod-
ucts with Respect to the Restriction of Hazardous Substances
•
CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to
"Contacting Siemens (Page vii)"
.
RUGGEDCOM RSG909R
Installation Manual, 02/2020, C79000-G8976-1388-09
37
