Installing the Device
2.5.2 Wiring Examples
7. Using a #6 ring lug and #6-32 screw, secure the ground terminal on the power
source to the chassis ground connection on the device. Make sure the lug is
tightened to 1.7 N·m (15 lbf·in).
2
1
3
1
Stainless Steel Stud
2
#6-32 Screw
3
#6 Ring Lug
Figure 2.6
Chassis Ground Connection
DANGER
Electrocution hazard – risk of death, serious personal injury and/or damage
to the device
Make sure the supplied terminal block cover is always installed before the
device is powered.
8. Install the terminal block cover.
2.5.2
Wiring Examples
The following illustrate how to connect power to single and dual power supplies.
16
RUGGEDCOM RSG2300F
Installation Manual, 04/2021, C79000-G8976-1347-09
