Siemens RUGGEDCOM RS950G, Installation Manual

Page: 12 / 42

Chapter 1
Introduction
RUGGEDCOM RS950G
Installation Guide
2 Description
• 20 AWG steel enclosure
Section 1.2
Description
The RUGGEDCOM RS950G features various ports, controls and indicator LEDs for connecting, configuring and
troubleshooting the device. The final device configuration is determined during the ordering process. The
following describes the major options available.
5
5
3
4
2
1
8
5
9
10
6
7
6
7
6
7
Figure 1: RUGGEDCOM RS950G
1. POWER LED 2. ALARM LED 3. HSR LED 4. PRP LED 5. Port Status LED 6. SFP Pluggable Fiber Transceiver 7. Copper Ethernet Port
8. RS-232 Console Port 9. Failsafe Alarm Relay Terminal 10. Power Supply Terminal
LEDs LEDs indicate the operational status of the device.
POWER LED Illuminates when power is being supplied to the device.
State Description
Green Device is ready
Red Device is booting up
Off No power
ALARM LED Illuminates when an alarm condition exists.
HSR LED Illuminates when the device is in HSR Redbox mode.