Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
476
Deleting a Key Chain
Parameter
Description
start { start }
Synopsis:
A string
Sets the time period in which the key on the key chain is considered valid.
expire { expire }
Synopsis:
{ infinite } or a string
The time at which the key expires.
6. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.7.9.5
Deleting a Key Chain
To delete a key chain for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key chain by typing:
no
routing rip key-chain
name
Where:
•
name
is the name of the key chain
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.7.9.6
Deleting a Key
To delete a key from a key chain, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key by typing:
no
routing rip key-chain
name
key
id
Where:
•
name
is the name of the key chain
•
id
is the ID of the key
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
