Chapter 12
Tunneling and VPNs
RUGGEDCOM ROX II
CLI User Guide
428
Adding a 6in4 or 4in6 Tunnel
TUNNEL
NAME LOCAL IP REMOTE IP STATUS
----------------------------------------------
tu 192.168.20.10 192.168.20.20 Active
Section 12.9.4
Adding a 6in4 or 4in6 Tunnel
To add a 6in4 or 4in6 tunnel, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the tunnel by typing:
tunnel
[ ip6in4 | ip4in6 ] tunnel
name
Where:
•
name
is the name of the tunnel
3. Configure the following parameter(s) as required:
Parameter
Description
local-ip
Synopsis:
A string 7 to 15 characters long
The interface upon which the tunnel is created
This parameter is mandatory.
remote-ip
Synopsis:
A string 7 to 15 characters long
Ip address of remote tunnel end
This parameter is mandatory.
status
Synopsis:
A string
Current status of tunnel
This parameter is mandatory.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 12.9.5
Deleting a 6in4 or 4in6 Tunnel
To delete a 6in4 or 4in6 tunnel, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the tunnel by typing:
no
tunnel [ ip6in4 | ip4in6 ] tunnel
name
Where:
•
name
is the name of the tunnel
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
