RUGGEDCOM ROX II
CLI User Guide
Chapter 7
IP Address Assignment
Deleting an Address Pool (IPv4)
247
Where:
•
name
is the name of the subnet
•
description
is the name of the IP pool
3. Configure the leased time settings by configuring the following parameter(s):
Parameter
Description
default { default }
Synopsis:
A 32-bit unsigned integer
Default:
600
The minimum leased time in seconds that the server offers to the clients.
maximum { maximum }
Synopsis:
A 32-bit unsigned integer
Default:
7200
The maximum leased time in seconds that the server offers to the clients.
4. Configure the client and failover settings by configuring the following parameter(s):
Parameter
Description
unknown-client { unknown-client }
Synopsis:
{ allow, deny, ignore }
The action to take for previously unregistered clients
failover-peer { failover-peer }
Synopsis:
A string 7 to 15 characters long
The IP address of a DHCP peer server if a failover pool is created.
5. Add one or more IP ranges to the pool. For more information, refer to
Section 7.3.13.2, “Adding an IP Range
.
6. Add one or more Option82 classes to the pool. For more information, refer to
Option 82 Class to an Address Pool”
7. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 7.3.11.3
Deleting an Address Pool (IPv4)
To delete an address pool, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the address pool by typing:
no
services dhcpserver subnet-name
name
options ippool
description
Where:
•
name
is the name of the subnet
•
description
is the name of the IP pool
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
