Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
176
Adding a Private Key
Section 6.8.5.2
Adding a Private Key
To add an unsigned private key, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the private key by typing:
security
crypto private-key
name
Where:
•
name
is the name of the private key
3. Configure the following parameter(s) as required:
NOTE
Before inserting the contents of the key, enter multi-line mode by pressing
Esc+m
. Press
Ctrl+d
to
exit multi-line mode after the key has been added.
Parameter
Description
algorithm { algorithm }
Synopsis:
{ rsa, dsa, ssh-rsa }
The type of key.
This parameter is mandatory.
contents { contents }
Synopsis:
A string 1 to 8192 characters long
The contents of the unsigned private key.
This parameter is mandatory.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.8.5.3
Deleting a Private Key
To delete an unsigned private key, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the private key by typing:
no
security crypto private-key
name
Where
name
is the name of the private key
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.8.6
Managing Public Keys
This section describes how to manage public keys on the device.
CONTENTS
•
Summary of Contents for RUGGEDCOM ROX II
