Chapter 4
Device Management
RUGGEDCOM ROX II
CLI User Guide
80
Adding a Remote Server Selector
Section 4.10.6.2
Adding a Remote Server Selector
To add a remote server selector, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the remote server selector by typing:
admin
logging server
address
selector
name
Where:
•
address
is the IP address of the remote server
•
name
is the name of the log selector identifier
3. Configure the following parameter(s) as required:
Parameter
Description
negate
Excludes messages defined in the
Remote Server Selector
fields from the log. Selecting
this option acts as a logical NOT for the selector definition.
For example: Selecting
same
,
debug
, and
in the
Comparison
,
Level
, and
Facility-
list
fields includes debug messages from the mail subsystem in the log. Selecting
Negate
excludes
debug messages from the mail subsystem from the log.
comparison { comparison }
Synopsis:
{ same_or_higher, same }
Default:
same_or_higher
The message severity levels to include in the log:
•
same:
includes only messages of the severity level selected in the
Level
field.
•
same_or_higher:
includes messages of the severity level selected in the
Level
field,
and all messages of higher severity.
For example:
• Selecting
debug
in the
Level
field and
same
in the
Comparison
field includes only
debug messages in the log.
• Selecting
debug
in the
Level
field and
same_or_higher
in the
Comparison
field
includes debug and all higher severity messages in the log.
level { level }
Synopsis:
{ emerg, alert, crit, err, warning, notice, info, debug, none, all }
Default:
all
The base message severity level to include in the log.
all
includes all messages.
none
excludes all messages. Other levels are listed in order of increasing severity.
facility-list { facility-list }
Synopsis:
{ auth, authpriv, cron, daemon, ftp, kern, lpr, mail, news, security, syslog,
user, uucp, local0, local1, local2, local3, local4, local5, local6, local7, all }
The subsystems generating log messages. Messages from the selected subusystems are
included in the log. At least one subsystem must be selected; up to 8 subsystems can be
selected.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 4.10.6.3
Deleting a Remote Server Selector
To delete a remote server selector, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the remote server selector by typing:
Summary of Contents for RUGGEDCOM ROX II
