RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Deleting an SNMP Group
193
Section 5.7.3.3
Deleting an SNMP Group
To delete an SNMP group, do the following:
1. Navigate to
Administration
»
Configure SNMP
»
Configure SNMP Access
. The
SNMP Access
table
appears.
Figure 141: SNMP Access Table
2. Select the group from the table. The
SNMP Access
form appears.
9
7
8
6
5
4
3
2
1
Figure 142: SNMP Access Form
1.
Group Box
2.
Security Model Box
3.
Security Level Box
4.
ReadViewName Box
5.
WriteViewName Box
6.
NotifyViewName Box
7.
Apply Button
8.
Delete Button
9.
Reload Button
3. Click
Delete
.
Section 5.8
Managing Network Discovery
ROS supports the Link Layer Discovery Protocol (LLDP) and RUGGEDCOM Discovery Protocol (RCDP), both
Layer 2 protocols for automated network discovery.
The following sections describe how to configure and manage network discovery, refer to the following:
•
