Introduction
1.3 Required Tools and Materials
LINK/ACT LED
Indicate the connection status of the fiber optic Ethernet ports.
State
Description
Yellow (Solid)
Link is established
Yellow (Blinking)
Port activity
Power Supply Terminal
A pluggable terminal. For more information, refer to:
•
•
"Power Supply Specifications (Page 17)"
Communication Ports
Receive and transmit data. For more information about the
various ports available for the RUGGEDCOM RMC41, refer to
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RMC41:
Tools/Materials
Purpose
AC or DC power cord (16 AWG)
For connecting power to the device.
CAT-5 Ethernet cables
For connecting the device to the network.
Flathead screwdriver
For mounting the device to a DIN rail.
Phillips screwdriver
For mounting the device to a panel.
4 x #8-32 screws
For mounting the device to a panel.
1.4
Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated
Configuration Manual
.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11
3
