Siemens RUGGEDCOM RMC, Installation Manual

Page: 8 / 34

Chapter 1
Introduction
RUGGEDCOM RMC
Installation Guide
2 Description
• Fully integrated power supply connects directly to power source permanently for reliable maintenance-free
operation
Universal Power Supply Options
• 24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options for worldwide operability
• Integrated high-reliability power supply eliminates the need for external power transformer
• Screw down terminal blocks ensure reliable maintenance-free connections
• All power supplies CSA/UL 60950 approved for 85 °C (185 °F) operation
Section 1.2
Description
The RUGGEDCOM RMC features various ports, controls and indicator LEDs on the display panel for connecting,
configuring and troubleshooting the device. The display panel can be located on the rear, front or top of the
device, depending on the mounting configuration.
1
5
6
3 2 4 7
8 9
Figure 1: RUGGEDCOM RMC
1. POWER LED 2. X-Over Switch 3. Copper Ethernet Port with LEDs 4. Fiber Optic Ethernet Ports 5. ACT LED 6. LINK LED
7. MODE Switch 8. Power Terminal Block 9. Chassis Ground Terminal
POWER LED Illuminates when power is being supplied to the device.
State Description
Green Power is on
Off Power is off
LINK/ACT LEDs Indicate the connection status of the fiber optic Ethernet ports.
LED State Description
LINK Green (Solid) Link is established