RUGGEDCOM MX5000RE
Installation Guide
Chapter 4
Modules
Installing/Removing Line Modules
37
Blank Modules
RUGGEDCOM MX5000REPN PS XX
Specifications
Blank power supply module, full
panel
Article Numbers
6GK6050-0RL10-0AA1
RUGGEDCOM MX5000REPN LM XX
Specifications
Blank line module, half panel
Article Numbers
6GK6050-0RL20-0AA1
Section 4.2
Installing/Removing Line Modules
Upon installing a new line module in the device, all features associated with the module are available in
RUGGEDCOM ROX II. For more information, refer to the
RUGGEDCOM ROX II User Guide
for the RUGGEDCOM
MX5000RE.
Once a line module is removed, all the features associated with the module are hidden or disabled in RUGGEDCOM
ROX II.
1
2
3
5
6
7
8
4
Figure 27: Line Modules
1.
Ethernet Module Slot (LM1)
2.
Ethernet Module Slot (LM2)
3.
Ethernet Module Slot (LM3)
4.
Control Module (CM)
5.
Switch
Module (SM)
6.
Ethernet Module Slot (LM4)
7.
Ethernet Module Slot (LM5)
8.
Ethernet Module Slot (LM6)
CAUTION!
Contamination hazard – risk of equipment damage. Prevent the ingress of water, dirts and other debris
that may lead to premature equipment failure. Always make sure slots are not left empty and open
ports are protected with plugs or covers.
