Chapter 4
Modules
RUGGEDCOM MX5000
Installation Guide
28
Installing/Removing Power Supply Modules
1
2
3
Figure 18: Installing a Module
1.
Chassis
2.
Module
3.
Screw
5. Tighten the screws to secure the module.
6. [Optional] If necessary, install the device in the rack.
7. For control and switch modules only, connect power to the device.
Section 4.3
Installing/Removing Power Supply Modules
The RUGGEDCOM MX5000 supports dual redundant power supplies that can be installed in any combination.
1
2
Figure 19: Power Supply Modules
1.
Power Supply Module (PS1)
2.
Power Supply Module (PS2)
