Siemens RM400 C Series, Operating Manual

Page: 100 / 227

90
RM400 C Models U24802-J-Z146-2-7600
7
Software
Deadkey
Possible values: disabled , enabled
Diacritical characters (e.g. accents) should appear as independent
characters (
disabled ) or only in combination with a suitable basic
character ( enabled ). Press the
[CHOICES]
function key if you want to
change the default setting disabled .
Code set for ANSI
Possible values: 88591 , 850
Here, you can specify which PC code table is to be used for the ANSI
terminal emulation(s). The code table can be based on either the ISO
8859 Standard or the PC Industry Standard. The 97801 terminal
emulation (x97801) basically only supports ISO 8859. Press the
[CHOICES]
function key, if you want to change the default setting.
Proceed as follows:
Ê Fill in the form.
Ê Save the values by pressing the
[SAVE]
function key.
Concluding the keyboard configuration
A message is displayed informing you that the keyboard has been configured
successfully.
Ê Press
[CANCEL]
to close this message window.
Ê Press
[EXIT]
to conclude the keyboard configuration.
The selected settings become effective as soon as autoboot is
completed. It is not necessary to restart the system. When autoboot is
complete, the only thing you have to do is to assign the correct value to
the
$LANG environment variable.
i