CE1B3035en / 02.05.2000
Subject to alteration
Siemens Building Technologies / Landis & Staefa Division
2SHUDWLQJLQVWUXFWLRQV
/DQGLV 6WDHID5'(«
RDE... - the temperature controller that allows you to set the ideal room temperature at the time you want. There
are several switching patterns available that can be set to your specific needs. You can either rely on the factory
settings or make settings that suit your personal needs.
2SHUDWLRQ
Normal operation
Energy saving mode
Heating on
Replace
batteries
:DUPHUFROGHU
Setting the
temperature setpoints
and the time of day
2SHUDWLQJPRGH
VHOHFWRU
Batteries
(only with battery-powered versions)
3035Z11E
'LVSOD\
Normal operation
Energy saving mode
$XWRPDWLFRSHUDWLRQ
&RQWLQXRXV
QRUPDORSHUDWLRQ
&RQWLQXRXV
HQHUJ\VDYLQJPRGH
Day (1 = Monday / 7 = Sunday)
Measured room temperature
Time of day
Switching pattern
with time cursor
Confirmation
6HWWLQJV
Time of day
Switching pattern
Weekday
Automatic operation/
switching pattern
settings
1.5V
’AAA’
1.5V
’AAA’
&RPPLVVLRQLQJZLWKTXLFNVWDUWXS
The controller is supplied with factory-set switching patterns, switching times and temperatures. To commission it,
proceed as follows:
1.5V ’AAA’
1.5V ’AAA’
Remove the black transit tabs from the two batteries. Check to see if the battery holder is in its correct position. The
controller switches itself on (only with batteriy-powered versions).
Press button
. Press
to set the current time of day and confirm by pressing
.
Press button
. Press
to set the current weekday and confirm by pressing
.
(1 = Monday through 7 = Sunday).
Select the required operating mode with the operating mode selector.
'R\RXZDQWWRXVHDXWRPDWLFRSHUDWLRQ"
If that is the case, set the operating mode
selector to position
.
You use the 7-day time switch with
DXWRPDWLF
FKDQJHRYHU
between normal operation and
energy saving mode / off.
'R\RXUHTXLUHFRQWLQXRXVQRUPDORSHUDWLRQ"
Move the operating mode selector to normal
operation. This ensures continuous heating to the
normal temperature. The display shows
.
'R\RXUHTXLUHFRQWLQXRXVHQHUJ\VDYLQJ
PRGH"
Move the operating mode selector to energy
saving mode. This ensures continuous heating to
the energy saving temperature.
The display shows
.
$UH\RXUURRPV
WRRZDUPWRRFROG
"
&
By pressing these buttons, you increase or
decrease the room temperature setpoint in
increments of 0.5 °C. The display first shows the
newly selected temperature and then the
measured actual value again.
7KHVHFKDQJHVDUHYDOLGRQO\XSWRWKHQH[W
VZLWFKLQJSRLQW
,IDVDUHVXOWRIWKHIDFWRU\VHWWLQJV\RXDOZD\V
IHHOHLWKHUWRRZDUPRUWRRFROG\RXVKRXOGUHDG
MXVWWKHWHPSHUDWXUHVHWSRLQWRIQRUPDORSHUDWLRQ
RUHQHUJ\VDYLQJPRGH WRVXLW\RXUQHHGV
'R\RXZDQWWRFKDQJHWKHWHPSHUDWXUH
VHWSRLQWVRIQRUPDORSHUDWLRQRUHQHUJ\VDYLQJ
PRGH"
or
3URFHHGDVIROORZV
•
Press or if you want to change the
setpoint of normal operation or of energy
saving mode
•
The setpoint display starts flashing
•
Press the buttons to change the temperature
setpoints in increments of 0.5 °C.
•
By
pressing
, the setting will be saved
and the entry mode quit
,PSRUWDQW
In energy saving mode, the unit can be set to
2))
. Proceed as follows:
•
Change the temperature setpoints to 5°C.
•
Press and hold
for 4 seconds.
Symbol
will not appear on the display.
5LVNRIIURVW
