Rapidlab 1200 Operator’s Guide: Maintenance
5-29
02087462 Rev. V
Maintaining the Sensors
Performing regular maintenance on the sensors is important to the life of the
sensors. This section contains the following information:
•
Replacing the sensors
•
Performing reference sensor maintenance
•
Refilling the sensors
Replacing the Sensors
You need the following materials for this task:
•
Appropriate sensor
•
Appropriate sensor fill solution
•
Reference sensor replacement kit
•
Hex tool
•
Lint-free tissue
Preparing the Sensors
•
Equilibrate new Glucose and Lactate biosensors at room temperature
(18
°
to 25
°
C) for at least 1 hour before installing.
•
Keep the biosensors in their foil packages while they are equilibrating.
BIOHAZARD:
Wear personal protective equipment. Use universal precautions.
Refer to
Appendix A, Protecting Yourself from Biohazards
for recommended
precautions when working with biohazardous materials.
CAUTION:
Do not remove or return the sensors to the measurement module
without first discharging static buildup. Touch the inner surface of the
measurement module frame to discharge static buildup.
Summary of Contents for Rapidlab 1200
