Siemens Rapidlab 1200, Operator'S Manual, Page: 118 / 448

2-30 Rapidlab 1200 Operator’s Guide: Operating the System
02087462 Rev. V
Recalling Patient Sample Results
Use the Recall screen to view and print results for previously analyzed patient samples.
You can also send the recalled results to a data management system or a laboratory
information system (LIS).
For more information about changing demographic data for previously analyzed patient
samples, refer to
Editing Demographics ‚ page 2-25.
1. At the Analysis or Status screen, select
Recall > Patients
.
The list of patient samples are displayed.
2. Select the sample or locate the patient sample results you want to view.
3. View the results for the selected sample:
a. Select
Results
.
b. Select
More Results
to view results for other reported parameters.
c. Select
Print
to print the patient sample report.
d. Select
Send
to send results to a data management system or an LIS.
Interpreting the Patient Recall Screen Symbols
The following symbols may be displayed on the Patient Recall screen:
If you want to... Then...
view additional
samples,
a. Select the up or down arrow buttons to move
through the list.
b. Select the sample you want to view.
search for a sample by
patient ID,
a. Select
Search
.
b. Select
Clear
to delete the current patient ID.
c. Enter the patient ID and select
Continue
.
d. Select the sample you want to view.
Symbol Definition
a arterial sample
v venous sample
c capillary sample
mixed venous sample
a- a-v study sample
µ microsample, pH or pH, Glu, Lac sample
D code or message exists for this sample
demographics were edited