background image

 

 

 
 

 
 

Q-Series 

Technical Instructions

Document No. 155-755

February 28, 2013

 

Relative Humidity and 
Relative Humidity & 
Temperature Sensors for 
Critical Environments 
and Outdoor Air 

     

    

 

 

Siemens Industry, Inc. 

Description 

The Q-Series Relative Humidity and Relative Humidity & Temperature Sensors for 
Critical Environments and Outdoor Air monitor and transmit changes in humidity and 
temperature to the building control systems. 

Features 

  Operating voltage 24 Vac/13.5 to 35 Vdc 

  Signal output 0 to 10 Vdc/4 to 20 mA for relative humidity and temperature 

  Very high measuring accuracy across the entire measuring range 

  Capacitive humidity measurement 

  Precise, stable humidity sensing 

  Available in 2% and 2%, certified models 

 Optional 

display 

  Recalibration service available (QFA41 Series only) 

Application 

The Q-Series Outdoor Air rh and rh/T Sensors are for use in HVAC applications where 
high accuracy and short response times for measuring relative humidity are required. 
The measuring range covers the entire humidity range of 0 to 100%. Some application 
examples: 

  Storage and production facilities in the paper, textile, pharmaceutical, food, chemical 

and electronics industry, etc. 

 Laboratories 

 Hospitals 

  Computer and EDP centers 

 Greenhouses 

  Outdoor use requires AQF3100 Outdoor Mounting Kit 

Summary of Contents for Q Series









Reviews:

Related manuals for Q Series