Important notes
Manufacturer's notes
8
A26361-K412-Z107-3-7619
Power cord selection
The power cord for this unit has been
packed separately and has been
selected according to the country of
destination. It must be used to prevent
electric shock. Use the following
guidelines if it is necessary to replace
the original cord set.
The female receptacle of the cord set
must meet CEE-22 requirements (see
Figure 1).
Figure 1
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord with
a maximum length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please
consult Table A for the selection criteria for power cords used in the United States
and Canada.
Table A:
Cord Type
Size of Conductors
in Cord
Maximum Current
Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps