Siemens OZW772 Series Commissioning Instructions Download Page 66

Page: 66 / 176

66 / 176

Siemens

Web server OZW772... V6.0

CE1C5701en

Building Technologies

Visualize plants

2015-10-12

5.4 Toolbar

The menus described below are only displayed and operable on the
"Administrator" user level.

The following toolbar is displayed at home and on the device nodes, if no plant
web pages are generated:

Description (in German)

New

Create new plant web page.

Import

Import archived plant web page.
Plant web pages are archived and imported as .tar files.

The toolbar is as follows for an existing plant web page:

Description (in German)

Properties

Properties dialog for the plant web page. Enter the same as for
"New".
Furthermore, "Replace data point addresses" address identical
data points on another device (KNX address).

New

Create another plant web page.

Import

Import archived plant web page.

Edit

Switch to edit.

Copy

Copy selected plant web page to another device node.

Export

Export selected plant web page as .tar archive.

Delete

Deleted selected plant web page.

Click Edit to switch the plant web page to edit mode. The toolbar is as follows:

Only an administrator may generate and change visualization. User levels have the
same rights for operation and monitoring.

Note

View mode, no web
page available

View mode, web page
available

Edit

Description (in German)

Data point

Embed data point element to web page.
A data point element consists of two fields:

Data point value for a device connected via KNX or the Web

Server.

Data point text.

Text

Add free text (single line) to plant web page. The text is entered
in the field "Displayed name".

Link

Hyperlink to other plant web pages, to a document or an
external web page.

Partial picture

Add additional picture to plant web page. "Link external" inte-
grates periodically updated, external images (e.g. web cams).

User levels

Summary of Contents for OZW772 Series

















































































































































































Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands

Siemens OZW772 Series, Commissioning Instructions

Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands