Siemens OZS164 SERIES WEB SERVER Commissioning Instructions Download

Page: 11 / 108

2 Commissioning

This section describes how to commission the web server.

2.1 Prerequisites

The following conditions must be met to commission the web server:

Prerequisites

•

The web server is mounted and wired (see Installation instructions, G5711).

•

OZS164.23 only: The SIM card is inserted.

•

The connected bus device is commissioned.

•

The bus device has a valid address and is operational.

•

The bus device works troublefree; the fault LED is not lit.

•

The bus power supply to the bus device is turned on.

•

Recommended by clock time supplier: The LPB bus device is clock slave with

remote setting.

•

IP address USB:

192.168.250.1

(unchangeable)

•

IP address Ethernet:

192.168.251.1

(ex works)

Notes

11 / 108

Siemens Web

server

CE1C5711en

Building Technologies

Commissioning

25.08.2010

Summary of Contents for OZS164 SERIES WEB SERVER













































































































Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands

Siemens OZS164 SERIES WEB SERVER, Commissioning Instructions

Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands