Siemens optiPoint 500 advance User Manual Download

Page: 17 / 127

Answering calls and Making calls

Step by Step

Open listening

You can allow other persons in the room to listen in on
the call. Always inform the other party that you are
switching to the speaker.

Precondition:

You are making a call with the handset.

To activate:

Press the key. The lamp lights up.

To deactivate:

Press the key. The lamp goes out.

Switching to speakerphone

This function is not available with the
optiPoint 500 economy/basic.

Precondition:

You are making a call with the handset.

and

Press the speaker key and release, then put the hand-
set down and continue the call.

Switching to the handset

Precondition:

You are on the phone in speakerphone

mode.

Lift the handset. Continue the call.

Speaker

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands