Siemens optiPoint 500 advance User Manual Download

Page: 16 / 127

Step by Step

Answering calls and Making calls

Answering a call with the handset

The telephone rings. The caller is displayed.

Lift the handset.

Ending a call:

Replace the handset.

Answering a call via the speaker key
(speakerphone)

The telephone rings. The caller is displayed.

Press the key. The lamp lights up.
You are in speakerphone mode.
(Note: optiPoint 500 economy/basic does not have a
microphone.)

Increase or decrease the volume. Keep pressing the
keys until the desired volume level is set.

Ending the call:

Press the key. The lamp goes out.

Notes for speakerphone mode:

•

Tell the called party that you are using speaker-
phone.

•

The speakerphone conversing equipment works
best at low volume settings.

•

The ideal distance between yourself and the tele-
phone for speakerphone conversing is approx.
20 inches.

Speaker

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands