Siemens optiPoint 500 advance User Manual Download Page 120

Page: 120 / 127

Step by step

Advice for users

120

Possible response:

Correct your input, select a permissible option, enter
the number in full.

Possible cause:

a) Attempt to use a barred function.
b) PIN entered incorrectly.

Possible response:

a) Contact your system administrator for authorization
to activate this function.
b) Enter the PIN correctly.

Possible cause:

Number not entered completely, star or pound key not
pressed.

Possible response:

Enter the number or code correctly
(or as instructed).

Possible cause:

Data transmission in progress.

Possible response:

Wait and then try again later.

Who to contact if a problem occurs

Contact your system administrator for problems lasting
longer than, for example, 5 minutes.

Not authorized

Not allowed

Not available

Protected

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands