Siemens OptiPoint 410 User Manual Download Page 70

Page: 70 / 204

Step by Step

Customizing the Telephone

Call Waiting

You can use this option to enable call waiting during an
active call.

Prerequisite

: You are in the "Configuration" menu

page 67.

Select and confirm.

Confirm. Second call is permitted.

Confirm. Second caller hears busy signal.

The new setting is displayed.

Call Transfer

Use this menu option to activate/deactivate the feature
for deflecting a current call to another party.

Prerequisite

: You are in the "Configuration" menu

page 67.

Select and confirm.

Confirm. Call can be transferred.

Confirm. Call transfer not permitted.

The new setting is displayed.

This menu option is only available if it has been
activated by the administrator.

08=Call waiting?

Switch on?

Switch off?

This menu option is only available if it has been
activated by the administrator.

09=Call transfer?

Switch on?

Switch off?

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Siemens OptiPoint 410, User Manual, Page: 70 / 204

Search results

Summary of Contents for OptiPoint 410

Reviews: