Siemens OptiPoint 410 User Manual Download

Page: 64 / 204

Step by Step

Sylantro Functions

Deactivating Caller ID Suppression Tempo-

rarily for Next Call

If the administrator has suppressed the transfer of your
caller ID, you can override this setting for the next call:

Lift the handset.

Enter the code, e.g. *67 (consult the administrator).

Wait until you hear the confirmation tone.

Dial the destination you want to call. Once you have fin-
ished the call, transfer of your caller ID is suppressed
again for subsequent calls.

Using Speed Dialing

The speed dialing feature allows you to call up a central-
ized list of frequently dialed telephone numbers.

This feature lets you easily place calls to frequently-di-
aled numbers by dialing a speed dialing code.

Lift the handset.

Enter a speed dial code e. g. *01 (range *01 to *20 for
personal codes and range *21 to *49 for company
codes).

The number is automatically dialed.

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Related manuals for OptiPoint 410

Brands by name

Popular brands