Siemens OptiPoint 410 User Manual Download Page 59

Page: 59 / 204

Operating the Telephone with the Display

Step by Step

Existing Connection

The following options are available when you answer a
call on a line (see

page 58):

•

Use the line in the same way as a single-line tele-
phone.

•

Place the line on hold manually.

Using the line in the same way as a single-line tele-
phone

Example:

If you have answered the call on one line, you can now
use all of the functions that are available for a call on a
single-line telephone:
•

Place the call on consultation hold and pick it up on
another phone

•

Transfer the call (see

page 29)

•

Consult with another party (see

page 36)

•

Pick up a waiting call (see

page 26)

•

Alternate between two calls (see

page 37)

•

Join a conference call (see

page 38)

Placing a call on hold manually

You can put an active call on hold using the line key.

Press the illuminated line key.

Confirm.

Only

the two following options are available:

•

Press the line key to reconnect the call.

•

Press another line key to call another party for
example.

Consultation?

Line

Holding?

Line

Summary of Contents for OptiPoint 410













































































































































































































Search results

Summary of Contents for OptiPoint 410

Reviews:

Brands by name

Popular brands

Siemens OptiPoint 410, User Manual

Search results

Summary of Contents for OptiPoint 410

Reviews:

Brands by name

Popular brands