Siemens OpenStage Key Module Operation Manual Download Page 90

Page: 90 / 215

Step by step

Call forwarding

Forwarding express activation for "all calls"

With a permanently saved station number

Prerequisite

: You have saved a forwarding destination

saved for fixed call forwarding

Page 85.

Press the key quickly. The LED lights up.
The forwarding destination saved is displayed.

if nec.

If you want to respond to the pop-up menu before the
automatic timeout:

Confirm.

Call forwarding is now active for all calls. The forwarding
destination is not lost when you deactivate call forward-
ing

Page 91.

With a temporarily saved station number

Prerequisite

: There is

forwarding destination saved

for fixed call forwarding

Page 85.

Press the key quickly. The LED lights up.

Enter the forwarding destination

Page 87.

The last forwarding destination saved for a variable call
forwarding instruction is the first entry in the pop-up
menu:

Select and confirm the option shown.

Prerequisite

: There is

one

forwarding destination

saved for fixed call forwarding

Page 85.

Press the key quickly. The LED lights up.

Select and confirm the option shown.

Enter the forwarding destination

Page 87.

Call forwarding is now active for all calls. The forwarding
destination is automatically deleted when call forward-
ing is deactivated

Page 91.

Set forward on to

Dalai, Lama

Set a forwarding destination

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands